Selengkapnya...
Showing posts with label Adsl. Show all posts
Showing posts with label Adsl. Show all posts
ABATEC
Start Internet browser . Type the IP address http://192.168.1.1
Enter Username >> admin , Password >> admin or password
Click OK
PROLINK Hurricane 6300G
Configuring with your Web Browser
Open your web browser, enter the IP address by default is 192.168.1.254, and click “Go”,
The default username and password are “admin”
Quick Start (wizard setup)
Click RUN WIZARD button
The Quick Start Wizard will appear.
Click NEXT to continue
Set your new password.
Click NEXT
Choose your time zone
Click NEXT
Set your Internet connection
Click NEXT
Enter The PPP Information provided by ISP
Click NEXT
Click NEXT to save the current settings
Restart your ADSL2+ Router
Finish
Wireless
Click Interface Setup menu then click Wireless in sub menu
You can disable or enable with WPA or WEP for protecting wireless network.
The Authentication type must be enabled to allow all wireless computers to communicate with the access points with any data encryption
Access Point Settings
Access Point: Default setting is set to Activated.
(If you do not have any wireless, both 802.11g and 802.11b, device in your network, select Deactived.)
SSID:
The SSID is the unique name of a wireless access point (AP) to be distinguished from another.
For security propose, change the default wlan-ap to a unique ID name (example: heruganteng) to the AP which is already built-in to the router’s wireless interface.
It is case sensitive and must not excess 32 characters. Make sure your wireless clients have exactly the SSID as the device, in order to get connected to your network.
WEP
The default key is key #1.
If you chose WEP 64-bits, then enter any 5 ASCII characters or 10 hexadecimal characters ("0-9", "A-F").
Example :
1. 0x12345fabcf --> 10 hexadecimal characters.
2. 0xfabcf --> 5 ASCII characters excluding symbols or
3. 0x12345 --> 5 ASCII characters excluding symbols.
If you chose WEP 128-bits, then enter 13 ASCII characters or 26 hexadecimal characters ("0-9", "A-F").
Example :
1. 0x00000444445555500000abcdef--> 26 hexadecimal characters.
2. 0x1234567891012 --> 13 ASCII characters excluding symbols
3. 0xabcdefabcdefa --> 13 ASCII characters excluding symbols
Click Apply to finished your wireless settings
Selengkapnya...
HUAWEI SmartAX MT800
CONFIGURATION
Type Default gateway http://192.168.1.1 in your browser.
Insert username & password > admin, click OK
Huawei homepages display
Click ATM Setting
Enter the parameter provided by ISP such as PVC, VPI/VCI, etc
Click Submit
Click Statistic, then click Save & Reboot
System View connection status
END.
Selengkapnya...
D-Link 504
Type the default IP address http:// 192.168.1.1 in the address bar of the browser.
The default User Name admin and default Password admin
Click the OK button to access the web-based manager.
Home directory tab will display the Setup Wizard menu.
Click Run Wizard
Set a password that is required to make changes to the configuration settings.
Click Next to continue
Set the system time of the Router.
Click Next.
Select the Connection Type for the Internet.
Click Next to proceed.
Type in the account. Your ISP has given this information to you.
Click Next to proceed to next page.
Click Restart to save the new configuration settings and restart the DSL-504T.
Do not turn the Router off while it is restarting.
END
Selengkapnya...
Subscribe to:
Posts (Atom)
